← Back to publications

Assessing the Impact of Cavity Structure on Collector and Using PCMs on Solar Chimney Power Plant Performance

Mohammed, Manar, et al. "Assessing the Impact of Cavity Structure on Collector and Using PCMs on Solar Chimney Power Plant Performance." International Journal of Heat and Technology 43.2 (2025): 721-730.
DOI: 10.18280/ijht.430231

BibTeX RIS

Abstract

In the present study, the impact of the type of phase change material (PCM) and the type of cavities created on the collector of a solar chimney power plant (SCPP) on power output has been investigated, numerically.The structure of the cavities applied is a rectangular shape and triangular shape, which have the same and constant size.Also, two types of PCMs, paraffin wax, and SAT-G, have been used.To evaluate the performance of the SCPP, studies for thermal radiation of 700, 1000, and 1300 W/m 2 have been conducted.The results reveal that with increasing heat flux, the output power increases.Also, the results obtained show that rectangular cavities create a stronger velocity field than triangular ones at the chimney base.In this regard, the solar power plant with rectangular cavities produces 30%, 32%, and 21% more power than the triangular case at heat fluxes of 700, 1000, and 1300 W/m 2 , respectively.In addition, the use of PCMs leads to the melting and storage of solar energy during the day.An examination of the melting process of PCMs indicates that the PCM of an SAT-G melts later than paraffin wax.In other words, SAT-G as a PCM stores more energy than paraffin wax.

Abstract by the authors, reproduced under the CC BY 4.0 licence. Original publication via the link below.

Open source PDF (open access)
Scroll to Top